TE Connectivity MEAS sensors to acquire U.S. company

Global connectivity leader TE Connectivity (NYSE: TEL) today announced that the United States MEAS Sensors (Measurement Specialties, Inc., Nasdaq: MEAS) has reached a definitive agreement to about $ 1.7 billion, or $ 86 per share (including assumed net debt) the total turnover MEAS acquired company. U.S. MEAS sensors is a global leader in sensors and sensor-based designer and manufacturer of the system, the current fiscal year revenue is estimated at $ 540 million. Provides a variety of sensors technology products, applications involving pressure, vibration, force, temperature, humidity, ultrasonic, location, and liquids.
TE Connectivity Chairman and CEO Tom Lynch said: “The acquisition of American MEAS sensors is an important part of our strategy to make our commitment in attractive, fast-growing field of sensors to be leaders, and to increase our nearly $ 40 billion potential market. this is an exciting acquisition because it enables TE increasingly close connection in today’s world, to provide customers with unparalleled connectivity and sensor solutions and we are looking forward to Measurement Specialties, Inc. great breadth of products and technology with the advantages of client resources within TE worldwide combined. we are also very welcome to join their talents TE. ”
Frank Guidone, CEO of American MEAS sensors, said: “Sensor market is very strong, the application of each product unit and the new devices are increasing year by year the number of parts we are very pleased by TE unparalleled market resources and capabilities, so. our products and services to customers around the world and our customers and employees are looking forward to seamless integration with TE’s, and become the preferred choice of the perceived need for technology providers. ”

flexible Printed Circuit 

Molex SL Series modular connector system provides reel packaging

Molex Announces Comprehensive SL (stackable single row) modular connector system provides reel packaging with vacuum pick and place cap. The newer systems can use automated termination procedure for printed circuit board (PCB) of high-speed processing and to facilitate accurate placement. SL Series connectors provide a modular approach for low-power and signal wire to board and wire-to-wire connection applications for different industries, including consumer electronics, medical, automotive and household appliances.
Niki Taylor Molex product manager, said: “As electronic technology becomes more common variety of devices from consumer goods to automotive systems, contract manufacturers have been facing the challenge of a lower cost of production is not only more product .Molex with the industry’s widest range of models and the number of configured modular connector cable type, and our new reel packaging can be used for high-volume production equipment to reduce labor demand and reduce costs. ”

SL modular connector system consists of a high vibration environment to ensure and maintain the security of the establishment of the socket latch mating interface, as well as increase strength and reduce terminal terminal allocate the risk of prolapse terminal position assurance (terminal position assurance, TPA) latch. This connector series through a number of unique features to provide maximum flexibility, including low-side high stackable case design, vertical and right angle connectors, including discrete wire crimp, FFC and IDT selection of wire termination connectivity options, as well as termination using different types of connectors can be mounted on a circuit board.

Since the terminal has two separate contacts and connections, thus providing a second current path redundancy, performance and long-term electrical reliability. In addition, it is compatible with 2.54mm pitch selection of C-Grid and KK 2.54mm pitch products, further increasing the number of configurations.

flexible Printed Circuit 

Electronic industry transferred to Vietnam from China.

The electronic industry transferred to Vietnam from China. Now Vietnam emerged as a major exporter of electronic. Vietnamese population has reached 90 million. Some global companies such as Samsung, Intel, LG have invested hundreds of millions on building factories at Vietnam that making Vietnam become the world’s 12th largest exporter of electrnic products.

Ten years ago, the Vietnamese actor insignificant role in the global electronics supply chain, but as of last year, exports of electronic products in Vietnam jumped to $ 38 billion.

Of course, this figure can not be $ 560 billion with China’s exports par, but it makes Vietnam ranks among the world’s 12th largest exporter of electronic products. Due to rising Chinese labor costs, an aging population, many electrical manufacturing companies will invest transferred to Vietnam.

Samsung is one of the top investors in which, over the years invested billions of dollars to build smart phones factories in Vietnam, Intel and LG have invested $ 1 billion construction of the plant, in addition to other electronic products have to follow suit.

flexible Printed Circuit 

Handle FPC Cable With Care In The Disassembly of iPhone 5s

Here’s a recommended approach to disassemble iPhone5s.

To disassemble iPhone5s, we must start from the screws on the bottom. First of all, screw out the two screws down there with a cross-shape screw-driver.

Next, you are going to use a sort of sucker to suck the screen to open the cellphone. Do not suck it too hard to safeguard the cables. The newly-developed FPC cables are soft, thin and bendable for cellphone application. When you disassemble the phone, handle it cautiously.

Then, you meet with HOME button. And what you need to do is to disconnect the two panels, namely separate the tiny and long cable attaching to HOME button.

After that, cut off the power, put screws and modules aside, disconnect all cables needed before the battery disassembly.

When screen panel connection is done cut, your next mission is simly to take the postposition camera down from the mainboard with a crowbar, and next the preposition one.

After all this parts done, finally you are to get the speaker modules.

Now all iPhone 5s parts are clearly on the desk. When you follow the above-mentioned procedures, matters needing attention are that great care is demanded when you handle with cables like FPC in your disassembly.

And below is another simple way:

Now I am showing people a useful and practical amateur approach to disassemble an Apple phone briefly.

In the very first place, as an amateur, we must adhere to a basic principle–we must be extremely careful and cautious in the disassembly process.

As we go from the screws of the phone, mark down the positions of the screws well in order not to mix a screw to a wrong position. Wrong screwing will endanger the screen.

There will be more than 30 screws. The next step is to disassemble the battery, the antenna, then the mainboard.

Both the disassembly and assembly for mainboard are complicated. As usual, we must try the screw bolt one by one.

What if the phone loses signal when done reassembly? All that we can follow up is to redisassemble the phone. Usually, we can find a reason why the signal is gone. For example, it could be a tiny cable, namely, you might have neglected a tiny round cable for signal function. Handlbe all cables, like FPC cables as well, we need to adjust the cables well in position. If we still find some cables left undone, we must fix them carefully.

Finally, we will implement a test to examine all functions. So this is the amateur approach and Apple phone fans might see to it for reference.

flexible Printed Circuit 

The invention of car airbag

Along with the development of the automotive industry and the improvement of people’s living standard, the car becomes the people in the life most major traffic tools. And the car’s performance improvement that the car has greatly increased, but the safety awareness of people is very weak. The traffic a ety systems are used in succession, is after the accident to ride up protection personnel.ccident is rising year
by year. Because in the process of vehicle driving speed, in the collision accident happens because of inertia, extremely easily to the front row in a personnel cause life threatening. To solve this problem, the safety belt, the airbags are invented.

There are two kinds of the airbags according to the installation location, front airbags and side airbags. Some of the cars also insatalled airbags at the inside of the door to improve the safty of passengers.

The airbag is made of nylon. The inner layer is coated with a polychloroprene to seal the gas. It’s folded into the package placed between the gas generator and decorative cover when the airbag is stationary. All the airbags need flexible flat cables to transport Signal.

Related:FFC Cable For Car Airbag

The development of flexible printed circuit

FPC is referred to flexible Printed Circuit , as known as flexible circuit boards, flexible printed circuit boards, flexible circuit boards, referred to as soft board or FPC, high density, light weight and is very thin. Mainly used in mobile phone, notebook computers, PDA, digital camera, LCM, and many other products. FPC flexible printed circuit is polyimide or polyester film to the substrate is made of a highly reliable, excellent flexible printed circuit .

Features:

1 can be freely bent, folded, winding, free to move and stretch in three-dimensional space.

2 good heat dissipation, F-PC can be used to reduce the size.

3 to achieve lightweight, small, thin, and the elements of the device to achieve integration of wires.

FPC Applications

MP3, MP4 players, portable CD players, home VCD, DVD, digital cameras, cell phones and cell phone batteries, medical, automotive and aerospace epoxy laminates FPC become important species with flexible features to epoxy substrate FCCL (FPC), has a special function due to more widespread use, is becoming an important species epoxy-based CCL. But our late start to be catching up.

Since the epoxy flexible printed circuit boards being used in industrial production, this industry has experienced 30 years of development. From the 1970s, large-scale production began to enter the real industrialization until the late 1980s, due to a new class of polyimide film material advent and application of FPC flexible printed circuit board so that there has been no adhesive formulations the FPC (generally referred to as “two-story type FPC”). In the 1990s the development of the world with high-density circuit corresponding photosensitive coating film, making the FPC has made significant changes in terms of design. Due to open up new application areas, the concept of its products took place in the form of no small change, which it expanded to include a wider range of TAB, COB with the substrate. In the latter half of the 1990s, the rise of high-density FPC began to enter the large-scale industrial production. It’s fine circuit pattern to a more dramatic level of development, high-density FPC market demand is growing rapidly.

Related:FFC Cable For Car Airbag